| ← |
TKBA 40
SKF belt alignment tool TKBA 40 higly accurate tool for V-belt pulley alignment.
Application: The SKF TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy and fast to attach. The three–dimensional target area on the receiver unit allows the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel or a combination of all three.
Advantages: Powerful magnets allow fast and easy attachment, three-dimensional target area simplifies the alignment process, V-guides facilitate the alignment of a wide range of V-belt pulleys, a maximum operating distance of 6 m (20 ft) accommodates many applications.
Producer: SKF (Sweden)
Technical information:
| Designation | TKBA 40 |
| Type of laser | Red laser diopde |
| Laser | 1x Built-in class 2 laser, <1 mW, 632 nm |
| Laser line length | 3 m at 2 m |
| Measurement accuracy angular | Better than 0,2° |
| Measurement accuracy offset | Better than 0,5 mm |
| Measurement distance | 50 mm to 6000 mm |
| Control | Laser on/off switch |
| Housing material | Extruded aluminium |
| Dimensions: transmiter unit/receiver unit | 70 x 74 x 61 mm/96 x 74 x 61 mm |
| Weight: transmiter unit/receiver unit | 320 g/320 g |
| Mounting | Magnetic, groove mounted |
| Battery | AAA Alkaline type IEC LR03 - 2 pcs. |
| Operation time | 20 hours continuous operation |
| Carrying case dimensions | 260 x 180 x 85 mm |
| Total weight | 1,3 kg |
| Operating temperature | 0 to 40°C |
| Storage temperature | -20 to +65°C |
| Relative humidity | 10 to 90% RH non-condensing |
| IP rating | IP 40 |
| Calibration certificate | Valid for 2 years |
| Case content | 1 TKBA 40 transmiter unit 1 TKBA 40 receiver unit 2 AA batteries 4 sizes of V-guides, 3 of each size 1 printed instruction for use 1 calibration certificate |
| ↑ | ← |
